Kitchen Cleaver Guide: What a Cleaver Is For and How to Choose One

Hand-forged Damascus kitchen cleaver with a horn handle resting on its leather sheath

In short: a kitchen cleaver is a wide, heavy-bladed knife for jobs a chef's knife finds hard: chopping through chicken and pork joints, portioning meat, cutting dense vegetables like squash, crushing garlic and ginger with the flat, and scooping chopped food off the board. Choose by what you cook most: a wide-belly chef's cleaver for everyday chopping, a butcher-style cleaver for portioning meat, and a Serbian-style cleaver if you want one blade that chops and rocks.

What is a cleaver used for?

Job Why a cleaver does it well
Breaking down a whole chicken or duck The weight carries the blade through the joints in one stroke
Portioning ribs, chops and roasts A tall, straight edge meets the board along its full length
Squash, cabbage, celeriac The blade is heavy enough to go through without rocking or forcing
Garlic, ginger, lemongrass Press with the flat of the blade to crush, then chop
Moving food to the pan The wide blade works like a bench scraper
Herbs and vegetables A sharp, straight edge chops fast with an up-and-down motion

Cleaver vs chef's knife

A chef's knife is light, pointed and curved, made for slicing and rocking. A cleaver is taller, heavier and squarer, made for chopping straight down. Most cooks who own a cleaver keep both: the chef's knife for fine work and a pointed tip, the cleaver for force and volume.

Chef's knife Cleaver
Blade shape Narrow, curved, pointed tip Tall and wide, flat or gently curved edge
Main motion Rocking and slicing Chopping straight down
Best for Onions, herbs, slicing meat, precise cuts Joints, portioning, dense vegetables, crushing, scooping
Weight Light Heavy; the weight does the work

The main cleaver shapes

Wide-belly chef's cleaver. The everyday kitchen cleaver: a broad blade with a gently curved edge that chops vegetables, splits joints and crushes garlic. Our Forged Chef's Cleaver with a rosewood handle is hand-forged from high-carbon steel and differentially hardened, so it shows a natural hamon line where the hard edge meets the softer, hammer-textured spine. The same blade comes with a tortoiseshell resin or galaxy resin handle. The Hammered Forge Cleaver has a hand-hammered (tsuchime) face that helps food release from the blade. For a pattern-welded look, the Forge Cleaver has a full-belly Damascus blade.

Serbian-style cleaver. A wide blade with a rounded belly and a curved tip, usually hand-forged and left with a rugged finish. The curve lets you rock it like a chef's knife as well as chop. See the Serbian Forge Cleaver with a horn and rosewood handle (raw forge finish) and the Serbian Hammered Forge Cleaver (hand-hammered face).

Butcher-style cleaver. A rectangular blade made for portioning meat. The Mosaic Damascus Butcher Cleaver adds an angled K-tip for detail work and a hanging hole for storage on a hook.

Feast-table cleavers. Two cleavers forged with all-steel handles: the Forged Loop-Handle Cleaver, one piece of carbon steel with a loop handle (about 11 in overall, 5.5 in blade), and the Damascus Cleaver with a rope-twist hook handle (about 12 in overall, 5 in blade). Both hang from a rail and look at home on a carving board at a big dinner.

How to choose a cleaver

  1. Start with what you cook. Mostly vegetables and whole chickens: a wide-belly chef's cleaver. A lot of meat to portion: a butcher-style blade. One tool for chopping and rocking: Serbian-style.
  2. Weight. Heavier blades chop with less effort but tire the wrist sooner. If you have never used a cleaver, a mid-weight chef's cleaver is the easiest start.
  3. Steel. High-carbon steel takes a very keen edge and is easy to sharpen, but needs drying and a little oil. Damascus gives a layered pattern with the same care. More in our steel comparison.
  4. Full tang. A cleaver takes real chopping force, so the steel should run the full length of the handle. Every cleaver in our Cleavers collection is built that way.
  5. Handle. Pick a grip that fills your hand: wood and horn feel warm, resin is easy to keep clean, all-steel handles are made to hang.
  6. Storage. A cleaver's edge is long and exposed, so it needs a home: a leather sheath, a knife roll or a hook. Every one of our cleavers comes with a leather sheath.

Can a cleaver cut through bone?

A kitchen cleaver goes through joints and small, soft bones such as chicken backs and wings. Aim for the joint, chop straight down, and let the weight do the work. Large, dense bones like beef leg or marrow bones need a bone saw or your butcher's band saw: a fine hand-forged edge can chip on them. Never twist or pry the blade in bone, and don't use it on frozen food.

How to use a cleaver well

  • Use a thick wooden board. Glass, stone and thin plastic boards dull the edge and let the cleaver bounce.
  • Grip close to the blade. Pinch the top of the blade just in front of the handle for control.
  • Chop, don't saw. Lift and bring the blade straight down; let its weight do most of the work.
  • Guide with your knuckles. Curl the fingers of your other hand and keep the blade flat against your knuckles for vegetables.
  • Scrape with the spine. Turn the cleaver over to push food across the board so the edge stays sharp.

Caring for a hand-forged cleaver

  • Hand wash and dry right away. High-carbon steel can rust if it's left wet; never the dishwasher.
  • A little food-safe oil on the blade now and then protects carbon steel and keeps a Damascus pattern clear.
  • Expect a patina. Carbon steel darkens with use. That grey-blue colour protects the steel and is normal.
  • Store it in its sheath or on a hook, not loose in a drawer.

More in our Knife Care guide.

A cleaver as a gift

A cleaver is the knife many good cooks don't own yet, which makes it a strong gift for someone who already has a chef's knife. Engraving is free, up to 20 characters on the blade or the leather sheath. It adds 2 business days, and engraved pieces are final sale. Details on our custom engraving page. If you'd rather give a whole kit, two of our sets include a cleaver: the Slatewood 6-Piece Chef Knife Set (a large and a small cleaver) and the Ironbark 4-Piece Butcher Knife Set (a cleaver, chef's knife, butcher's knife and boning knife), each rolled in a leather roll.

Cleaver FAQ

What is a cleaver used for in the kitchen?
Chopping through joints, portioning meat, cutting dense vegetables, crushing garlic with the flat, and scooping food off the board.

Do I need a cleaver if I already have a chef's knife?
Not for everyday slicing. A cleaver earns its place if you break down chickens, portion meat or chop a lot of dense vegetables, because it takes that work off your chef's knife and protects its finer edge.

What's the difference between a vegetable cleaver and a meat cleaver?
A vegetable cleaver (often called a Chinese chef's knife) is thin and light, for slicing and chopping produce. A meat cleaver is thicker and heavier, for joints and portioning. Keep a thin vegetable cleaver away from bone.

Can a kitchen cleaver cut bone?
Joints and small bones, yes. Large, dense bones need a saw, because they can chip a fine edge.

How do I stop a carbon steel cleaver from rusting?
Wash it by hand, dry it straight away, and wipe on a little food-safe oil now and then.

Can a cleaver be engraved?
Yes, free: up to 20 characters on the blade or the leather sheath. Engraving adds 2 business days, and engraved pieces are final sale.

Shop Cleavers →
Shop Chef Knife Sets →